OTHER ARTICLE CATEGORIES
|
|
Home Wind Generators
Get this wrong and your turbine won't be up for very long. Lastly, home wind generators requires a small amount of simple and easy - but important - regular inspection and maintenance.
All of these issues while important are far from insurmountable and all should be addressed in any plan or guide you use.Most of the guides for sale contain all the information necessary to build and install wind generated power in any home. It has a lot of video instruction and great advice on finding and/or building all the parts and how they go together. The author of this guide is in my opinion one of the top authorities on the subject. Check it out.
All of these issues while important are far from insurmountable and all should be addressed in any plan or guide you use.Most of the guides for sale contain all the information necessary to build and install wind generated power in any home. It has a lot of video instruction and great advice on finding and/or building all the parts and how they go together. The author of this guide is in my opinion one of the top authorities on the subject. Check it out.
Welcome to part 3 of this article on Home Wind Generators. If you missed part 1 and 2, see DIY Wind Generator.
In this section we’re going to discuss some of the planning and sizing considerations required before you start your project. These should help you avoid errors and additional expense, not to mention some headaches.
Have you ever put a bike together for your kid without using the instructions and ended up with left over parts at the end? What about assembling furniture only to find that one of the panels is inside out?
Then when you read the instructions you figure out you did something wrong of left out a step and have to disassemble everything and start over. Sound familiar? If you are anything like I used to be, you might have a habit of jumping into an assembly project without following the instructions. You don’t want to do that on this project. The instructions are going to be very important.
In this section we’re going to discuss some of the planning and sizing considerations required before you start your project. These should help you avoid errors and additional expense, not to mention some headaches.
Have you ever put a bike together for your kid without using the instructions and ended up with left over parts at the end? What about assembling furniture only to find that one of the panels is inside out?
Then when you read the instructions you figure out you did something wrong of left out a step and have to disassemble everything and start over. Sound familiar? If you are anything like I used to be, you might have a habit of jumping into an assembly project without following the instructions. You don’t want to do that on this project. The instructions are going to be very important.
Throughout this article we’ve stressed the beautiful simplicity of home wind generators. However, the parts must be properly sized, and they must work in harmony with one another or you won’t get the amount of power you expect, and worse yet, the finished product may be unsafe.
The blades and hub must be of the proper size and weight to work with the alternator being used. The alternator’s capacity to generate power will be determined by its own construction. So if you use an oversized alternator, or blades that are too small to produce the spin required, your turbine won’t work right. Likewise, if you use and undersized alternator and great big blades capable of spinning in excess of what the alternator can handle, you’ll have the same problem.
Also, the tail must be the right size and weight to swivel and furl the turbine at the right times and when wind speed and direction require. Otherwise, your turbine will remain stationary and you will only produce a fraction of the power you should. Plus you may put excess stress on the entire assembly, including the alternator, which will result in additional maintenance and repairs.
Perhaps most obviously, the home wind generators tower (used to elevate the turbine) has to be of sufficient construction to withstand the wind force that all turbines encounter every day.
The blades and hub must be of the proper size and weight to work with the alternator being used. The alternator’s capacity to generate power will be determined by its own construction. So if you use an oversized alternator, or blades that are too small to produce the spin required, your turbine won’t work right. Likewise, if you use and undersized alternator and great big blades capable of spinning in excess of what the alternator can handle, you’ll have the same problem.
Also, the tail must be the right size and weight to swivel and furl the turbine at the right times and when wind speed and direction require. Otherwise, your turbine will remain stationary and you will only produce a fraction of the power you should. Plus you may put excess stress on the entire assembly, including the alternator, which will result in additional maintenance and repairs.
Perhaps most obviously, the home wind generators tower (used to elevate the turbine) has to be of sufficient construction to withstand the wind force that all turbines encounter every day.
